Fixing A Severely Damaged Stained Glass Panel

This article outlines how to fix a really severely damaged panel, so shattered that the only other choice is to rebuild the entire panel. It is an unconventional repair method, but it's a good alternative to tossing your window in the trash.

Ed Sibbet is one of the very few book designers who creates designs which can be built as drawn and has great perspective.

The Gemini Girl was the first design that I ever built. I built a second copy of it after the first was damaged in a house fire. I spent 2 or 3 months building a custom oak frame in college. So it was very painful when the panel was knocked from it's hook and shattered into many pieces. Rebuilding it was out of the question, nearly every piece was damaged. It would have been easier to build a new one rather than using traditional repair techniques.

Even the oak frame was broken, but fortunately it had only broken at the original glue joints.

So, first I had to fix the frame by gluing and clamping it.

Then I had to tap in a broken piece under her eye and adjust several broken pieces to be as flat as possible. I used a small hammer and a piece of wood to coax pieces back in place. If there had been a piece missing I would have taped a piece of paper on the back of the panel and then soaked it off with water a few days later.

I then cleaned it carefully and put new black patina on the window.

Preparation is key. I once did the same repair to a panel and accidentally glued the piece to the work bench. I now recommend covering the bench with wax paper and don't leave any gaps in the glass where the resin can run through.

Then I mixed up the epoxy based resin, I used EnviroTex Lite, a pour on high gloss finish sold at craft stores. It was important to mix it vigorously for two minutes.

Then it was poured in place. I tipped the panel to run the mixture over the whole surface. Last, I blew on it to cause the small bubbles that formed to pop by reacting to carbon dioxide in my breath. A day or two later, I came back and coated the other side of the window.

As you can see on the left and on the picture below, the cracks are still visible. But the panel is strong and clean and still looks great. So this might not be the perfect way to fix a panel, but it is great for old pieces and valuable pieces and is especially good for pieces which are viewed from a distance, like skylights and architectural glass.

Photos to go with the article are at http://www.betterstainedglass.com/
Newsletter/Archives/2006Mar-severedamage/severedamage.htm

David Gomm started building stained glass windows professionally back in 1983 and has become an expert at many aspects of stained glass building, design and repair. He writes a monthly newsletter at his better stained glass website.

Stained Glass: The Right Equipment
It's a common fallacy that in order to enjoy the art of stained glass at home as a hobby, one must make a substantial investment. Though it is true that you will need to make a noteworthy amount of time and resource investment into this activity, as you do with any other hobby, you may be surprised at how accessible stained glass making really is a...

Just Too Happy For Words
The other day a client came to pick up a window we built for her. She took one look at it and broke into tears. Yes, it really was that beautiful, a real knockout of design. Most people don't burst into tears over the beauty of their window, that comes later on an overcast day, when they are in a mood and they walk in to see those vibrant colors th...

Stain Glass Supplies What You’ll Need For Great Stained Glass Masterpieces
Although stained glass can be purchased today, stain glass supplies are available for those who are interested in creating their own. Stained Glass utilizes particular materials due to a rather complex and involved process of creation. Common stain glass supplies are described below.1. Glassthe most obvious stain glass supply. The glass should be t...

Repairing A Broken Piece Of Glass
Here is a scratch or the start of a break. It might have been caused by excess heat or a flaw in the glass. It's been circled with pen so you can see it more readily.To replace the piece, we start by scoring the piece to be replaced many times. First one direction, and then the other.Then I tap from the bottom to loosen the pieces of glass. Notice ...

Repairing Major Damage
We left to do an install, but even before we got there, we realized that the 5' by 4' panel we were carrying had slipped off the rack on our trailer and had been broken.Jeanne inspects the damage while the panel is still on the trailer. She did a good job, she hardly cried at all!We laid the intact, broken panel on paper so we could trace it's outs...

Moving And Handling Glass
We've all seen those trucks running down the road with their loads of glass sitting in upright racks. It's such a common sight that we may not even ask ourselves why they ship glass standing up?Glass racks used by commercial glass companies are designed to hold glass vertically and at a slight angle.Our glass rack is built 52" high and the bottom i...

Studio Chemicals That Work Well With Stained Glass
We use many chemicals in the stained glass studio. It's sometimes helpful to review how they are best used and when they should be used. This helps us achieve better (and safer) results.Flux: Comes in different brands and strengths. The purpose of flux is to clean the outer layer of copper foil or lead so that solder will stick to it. Acid eats awa...